金蟾捕鱼

Welcome to visit: Botou Junzheng Environmental Protection Equipment Co., Ltd. !
One click to share website to:
泊头市君正环保设备有限公司
National free consultation hotline

15031895868

Pulse dust collector HOT
XMC型脉冲布袋除尘器

XMC type pulse bag filter

The company's main business: XMC-type pulse bag filter, XMC-type pulse bag filter manufacturer, XMC-type pulse bag filter, how much money, such as East XMC-type pulse bag filter, Jinhu XMC-type pulse bag filter Welcome new and old customers to patronize ...

15031895868 Order hotline: 15031895868

Product Details

泊头市君正环保设备有限公司泊头市君正环保设备有限公司布袋除尘器

产品展示

XMC type pulse bag filter

XMC型脉冲布袋除尘器

产品详情

How much is XMC type pulse bag filter @XMC type pulse bag filter manufacturer @XMC type pulse bag filter

XMC type pulse bag dust collector can be widely used in dust and fume collection systems such as crushing, mill, dryer, furnace and kiln of asphalt mixing building. The material of the filter bag of the dust collector is polyester needle felt, which allows continuous use. The temperature is less than or equal to 120 degrees. For example, if the filter bag is made of Metas high-temperature needle felt, its allowable temperature can reach 204 degrees. If the temperature of the exhaust gas to be processed is higher than the allowable temperature of the filter material mentioned above, cooling measures should be taken before the exhaust gas enters the dust collector.

XMC type pulse bag dust collector can be combined with a variety of different specifications of dust collectors according to different specifications of solenoid valves. The number of bags sprayed by each valve is 10, 12, 16, 24, 32. The filter bag has a diameter of 133mm, and the filter bag has two lengths of 2450mm and 3060mm. This series of dust collectors can be operated under negative or positive pressure without any change in the basic structure. The dust collection efficiency is more than 99.8%, and the dust concentration of the purified gas is <100mg. / m3, if this series of dust collectors are used in cold areas or when the flue gas is below zero ℃, a thermal insulation heating device should be added, and the casing should be changed accordingly.

XMC type pulse bag filter selection parameters and selection principles

(1) The main technical parameters of the unit selection are air volume, gas temperature, dust concentration and humidity. According to the large values of the air volume, gas temperature, and dust concentration in the process design, and the principle is slightly smaller than the values in the technical performance table, the corresponding dust collector model is the required dust collector model, and the filter bag is used. Determined according to inlet concentration, gas temperature, and humidity content.

(2) The air consumption in the table is the case of centralized air supply in the factory. For example, when the air machine is used alone, the actual air consumption should be increased to 1.5 times the value in the table.

(3) In the column of compressed air consumption, the proposed air consumption is the large air consumption of this type of equipment.

The structure of XMC pulse bag dust collector has its characteristics, so it improves the dust collection efficiency and adaptability, and prolongs the service life of the filter bag. After many years of production practice, the equipment runs stably, the maintenance is small, and the combination range is large. Praise. This series of products can be widely used in dust and fume collection systems for crushing, mills, dryers, furnaces and other dust in asphalt mixing buildings. The material of the dust collector filter bag is polyester needle felt, which allows continuous use temperature ≤ 120 ° C. If the filter bag is made of metas high-temperature needle felt, its allowable use temperature can reach 204 ° C.

Installation precautions of XMC pulse bag filter :

First, the electric control box cover of the stand-alone dust collector must not be opened at random during work. If you need to adjust the dust removal time or check the circuit, you should cut off the power supply to work after stopping.

2. According to the nature and capacity of the dust, the stand-alone dust collector should be regularly shaken and cleaned. Generally, three to four times per shift to ensure the normal operation of the dust collector.

3. The stand-alone dust collector regularly removes dust according to actual needs. When removing dust in the dust collector, when the fan and dust removal mechanism stops working, open the sealed dust outlet door and pull out the drawer.

Fourth, in order to ensure that the dust removal equipment is in good working condition, it should be as close as possible to the source of dust, generally 1.5 meters to 2.0 meters is better, the connecting pipe is as short as possible, and the elbow is minimized to avoid increasing resistance loss.

V. The dust extraction hood is a key accessory to ensure that the single dust collector unit is in a better state. The user unit should make the dust extraction hood in accordance with the principle of through, near, smooth, seal, and design according to the nature of the dust size of the processed parts. Ideal vacuum hood.

6. Before working, the stand-alone dust collector should check whether the maintenance door, the ash door, and the air pipe connection system are sealed to avoid leakage and reduce the dust collection effect.

7. The voltage of the stand-alone dust collector is 380 volts of three-phase AC power. It can be used after connecting the power from the external wires on the stand-alone dust collector. At the first rotation, pay attention to whether the fan is running forward (such as reverse, air volume) Very small, need to change the power wiring). The stand-alone dust collector is a dust collector that can be operated by connecting an air pipe and a power supply. This dust collector has a small size and does not require manual operation.

XMC pulse single dust collector technical parameters:

model 12-10 20-10 28-10 36-12 44-12 52-12 136-7 72-16 136-7L
Air volume m3 / h 7200- 14400 12000- 24000 16800-36600 25900- 51840 31600- 63360 37400- 74800 57100- 114200 69960- 139900 69960- 139900
Filtration area ㎡ 120 200 280 430 526 620 9 1152 1160
Filtering wind speed m / min 1-2
Equipment resistance Pa 1400-1700
Filter bag specifications & Phi; 130 × 24 & Phi; 130 × 3000
Number of filter bags 120 200 280 430 526 620 9 1152 9
Ash cleaning pressure Pa (5 × 7) × 105
Compressed air consumption m3 / min 0.6 1.0 1.4 1.7 2.1 2.5 4.8 7.0 6.5
Number of pulse valves 12 20 28 36 44 52 136 72 136
Pulse valve specifications 1 & Prime; 1 & Prime; 1 & Prime; 1 & Prime; 1 & Prime; 1 & Prime; 0.6 & Prime; 1.5 & Prime; 1 & Prime;
Dimensions L × W × H mm

2748 × 2430

× 5700

4308 × 2428

× 5700

5868 × 2478

× 5700

7428 × 2888

× 6100

8988 × 2938

× 6100

10548 × 2988

× 6100

13668 × 3598

× 7000

13938 × 3586

× 7300

13668 × 3598

× 7550

Equipment weight T 5.2 7.5 9.4 11.5 13.8 16.2 28.2 36.4 34.4

生产场景

泊头市君正环保生产场景

泊头市君正环保生产场景

公司简介

Botou Junzheng Environmental Protection Equipment Co., Ltd. is a professional manufacturer of environmental protection dust removal equipment integrating design, development, manufacturing, installation, commissioning and after-sales service. The company is located in Botou, Hebei Province, which is known as the “Hometown of Yali”. City, the company is close to the Beijing-Shanghai Railway, the Beijing-Shanghai Expressway and the 104 National Highway in the east, and the 106 National Highway in the west is connected to the Shihuang Expressway. The geographical location is superior and the transportation is very convenient.

The main products of Junzheng Environmental Protection are: bag dust collector, pulse dust collector, cyclone dust collector, stand-alone dust collector, filter cartridge dust collector, boiler dust collector, electrostatic dust collector, desulfurization and denitrification dust collector, woodwork dust collector, wet dust collector, Exhaust gas treatment equipment, industrial dust collectors, etc. Dust collector bag, dust collector frame, electromagnetic pulse valve, dust humidifier, star discharger, bucket elevator, plug valve butterfly valve, pulse controller, screw conveyor, electric dust removal accessories, etc. It is used for the recovery of particulate dust and fine dust in the waste gas of large, medium and small enterprises, such as chemical industry, power industry, metallurgy, asphalt mixer and other waste gas.

Junzheng Environmental Protection has more than one hundred types of dust collector equipment and its various accessories. Dust removal equipment is strictly controlled from design, manufacturing and inspection. The manufacturing standards are strictly implemented in accordance with national operating process regulations. Yanzhi Factory takes quality as the credibility and technology investment as the breakthrough point to produce more high-grade, high-quality, high-performance and durable bag-type dust collectors, which better serve customers, so it is widely received by customers across the country. Praise.

Over the years, we have received the love and support of customers and friends from all walks of life. Through the unremitting efforts of all employees, we have broken a path of market-oriented and quality-oriented survival, continuous improvement, continuous development and innovation, and established a firm quality The belief in winning has created brilliant performance with rapid growth year after year. Adhering to the business philosophy of “high requirements, high starting point, high standards”, Junzheng Environmental Protection develops the market with the best quality, captures the market with the most reasonable price, and wins credibility with the most thoughtful service. We are the most professional in the production of dust collector accessories.

All the staff of Junzheng Environmental Protection Co., Ltd. warmly welcome friends from all walks of life to visit and guide us. We are willing to work with you to create the better future with the best service and the most sincere heart!

联系我们


Botou Junzheng Environmental Protection Equipment Co., Ltd.

Contact: Manager Chang

Mobile: 15031895868

13643173471

Phone: 0317-8083463

Fax: 0317-8083465

Company QQ: 505310586

Email: [email protected]

Website: zshmw1688.com

Address: Siying Industrial Development Zone, Botou City, Hebei Province

泊头市君正环保设备有限公司

Recommended products HOT
  • Dust removal bag for soot filtering

    Dust removal bag for soot filtering

  • Non-ferrous metal industry special anti-corrosion dust bag

    Non-ferrous metal industry special anti-corrosion dust bag

  • Acrylic dust bag for metallurgy

    Acrylic dust bag for metallurgy

  • P84 dust bag for soot filtering

    P84 dust bag for soot filtering

  • Polyphenylene sulfide pps dust removal bag for coal-fired power plants

    Polyphenylene sulfide pps dust removal bag for coal-fired power plants

  • Special glass fiber dust bag for asphalt concrete production

    Special glass fiber dust bag for asphalt concrete production

Information recommendation HOT
support hotline:
0317-8199013
Online WeChat:
15031895868
Customer service QQ:
505310586