金蟾捕鱼

Welcome to visit: Botou Junzheng Environmental Protection Equipment Co., Ltd. !
One click to share website to:
泊头市君正环保设备有限公司
National free consultation hotline

15031895868

Delivery case HOT
Position: Home > Case

Delivery of 48 bags of pulse dust collector in Daxian

Release date: 2019-03-08 Category: Shipping cases «

Delivery of 48 bags of pulse dust collector in Daxian

,请王总做好接货准备,随货物有发货清单,请您在卸货时参照发货清单进行货物清点,以确保货物完整。 For 48 bags of pulse dust collectors in Daxian , please be ready to receive the goods. Mr. Wang has a delivery list with the goods. Please refer to the delivery list when unloading to ensure the integrity of the goods. The product certificate and instruction manual are included in the file together with the shipping list. We have assembled the main parts of the equipment for you in the unit. If you have any questions or do not understand, you can contact our technical staff at any time. We will be happy to help you and answer all questions at any time.

The following Junzheng Environmental Protection will explain the daily maintenance and maintenance of 48 bags of pulse dust collector:

The pulse bag filter is used for dust removal and filtration. The dust in the equipment's filter bag will continue to accumulate with the filtration process, causing the equipment resistance to increase. If the dust removal treatment is not performed in time, the performance of the equipment will often be affected. Equipment cleaning is an important part of maintenance and dust removal, but if you want the equipment to maintain efficient and stable operation, it is not enough to rely on cleaning and maintenance. Daily maintenance is also very important. Here are some requirements for daily maintenance of this type of dust collector for your reference.

First, the operator should be familiar with the internal structure and operating principle of the pulse dust collector, and be familiar with the control and adjustment methods.

The second is to regularly perform oil injection and oil change to ensure the flexible operation of the equipment. Pay particular attention to the two parts of the equipment: the ash conveying device and the reducer. Refuel in time.

The third is to periodically clean the oil-water separator, and the cleaning interval can be determined according to the frequency of use.

The fourth is to set the cleaning cycle, which can be adjusted according to needs, and the equipment is cleaned regularly. At the same time, check whether the pressure switch of the pulse precipitator is working normally, and whether there is any foreign matter at the pressure measurement port.

Fifth, pay attention that the compressed gas source cannot be blocked during shutdown.

Sixth, when the pulse precipitator is working, the ash discharge device must also run at the same time to prevent the dust from overflowing the ash hopper to forcibly cause the equipment to stop.

During normal load operation of the bag filter, the normal operation of the dust removal system will be affected due to changes in operating conditions or failures. Therefore, the staff must regularly check and properly adjust the dust collector in order to extend the service life of the dust bag, reduce power consumption, and maintain the best operating state with the lowest operating cost. Delivery of 48 bags of pulse dust collector in Daxian

The main products of Junzheng Environmental Protection are: bag dust collector, pulse dust collector, cyclone dust collector, stand-alone dust collector, filter cartridge dust collector, boiler dust collector, electrostatic dust collector, desulfurization and denitrification dust collector, woodwork dust collector, wet dust collector, Exhaust gas treatment equipment, industrial dust collectors, etc. Dust collector bag, dust collector frame, electromagnetic pulse valve, dust humidifier, star discharger, bucket elevator, plug valve butterfly valve, pulse controller, screw conveyor, electric dust removal accessories, etc. It is used for the recovery of particulate dust and fine dust in the waste gas of large, medium and small enterprises, such as chemical industry, power industry, metallurgy, asphalt mixer and other waste gas.

Junzheng Environmental Protection has more than one hundred types of dust collector equipment and its various accessories. Dust removal equipment is strictly controlled from design, manufacturing and inspection. The manufacturing standards are strictly implemented in accordance with national operating process regulations. Yanzhi Factory takes quality as its credibility and technology investment as a breakthrough point to produce more high-quality, high-performance, and durable bag-type dust collectors to better serve customers. Therefore, it has been praised by customers from all over the country.


Recommended products HOT
  • Dust removal bag for soot filtering

    Dust removal bag for soot filtering

  • Non-ferrous metal industry special anti-corrosion dust bag

    Non-ferrous metal industry special anti-corrosion dust bag

  • Acrylic dust bag for metallurgy

    Acrylic dust bag for metallurgy

  • P84 dust bag for soot filtering

    P84 dust bag for soot filtering

  • Polyphenylene sulfide pps dust removal bag for coal-fired power plants

    Polyphenylene sulfide pps dust removal bag for coal-fired power plants

  • Special glass fiber dust bag for asphalt concrete production

    Special glass fiber dust bag for asphalt concrete production

Information recommendation HOT
support hotline:
0317-8199013
Online WeChat:
15031895868
Customer service QQ:
505310586