●●●● The company's main business: high-efficiency rotary electrostatic precipitator, high-efficiency rotary electrostatic precipitator manufacturer, high-end rotary high-efficiency electrostatic precipitator High efficiency electric dust collector, welcome new and old customers to patronize ...15031895868 Order hotline: 15031895868
Rotary umbrella type high efficiency electric dust collector
Rotary Umbrella High -efficiency Electric Dust Collector
Rotary umbrella high-efficiency electric precipitator has always been the main equipment for dust collection and gas purification with its advantages such as high dust removal efficiency, low pressure loss, low maintenance costs, and low power consumption. XSC type rotary umbrella type electrostatic precipitator is the main and general dust collection equipment for dust and soot in the production process of building materials and other industries. Such as cement raw materials, clinker mills, cement raw material dryers and industrial and heating coal-fired boilers, cupolas, etc. in the building materials department are suitable for dust collection and dust removal. This product is a new type of dust removal equipment which is improved on the basis of ordinary electrostatic precipitators.
Features of Rotary Umbrella High Efficiency Electric Dust Collector:
1. The XSC type rotary umbrella type electrostatic precipitator organically combines the dual functions of mechanical dust removal and electric dust removal, and achieves the purpose of secondary dust removal in the same equipment, which greatly improves the initial inlet concentration.
2. By changing the direction of the air flow, the residence time of the gas in the effective electric field is increased.
3. An umbrella row board is added to separate the electric dust collection area from the dust fall area and avoid the secondary dusting of the dust collector.
4. The rapping device has good vibration transmission performance, thus ensuring the reliability of long-term operation of the electric field and the stability of the efficiency.
工作条件 Working Conditions of Rotary Umbrella High Efficiency Electric Dust Collector
1. Ambient temperature: -10- + 50 ° C (please specify when ordering below -20 ° C).
2. Ambient humidity: ≤85%.
3. Temperature of dusty gas: <250 ℃, but it must be higher than 20 ℃ above dew point.
4. Dust-containing gas temperature: It is advisable to prevent condensation in the electric field.
5. Dust specific resistance: 104-1012Ωcm.
安装要求： Rotary umbrella high-efficiency electrostatic precipitator installation requirements:
1. Check whether the equipment is intact and complete before installation, and whether the barrel is deformed due to transportation. Is there any oil leakage in the silicon high voltage rectifier? If so, it must be corrected before installation.
2. The foundation of the dust collector must be leveled. The ash bucket support and the foundation are elastically fastened.
3. The cylinder of the electric field must be perpendicular to the horizontal plane, and a sealing gasket (such as asbestos rope) should be added between the flanges, and then tightened with bolts. The corona wire must be straightly hung from the center of the cylinder after being straightened, and the distance between the center of the corona wire and the wall of the cylinder must be 350 ± 5mm.
4. The high-voltage silicon rectifier should be placed near the inlet of the electric field body, and there must be more than 500mm space around the negative high-voltage output terminal and the connection. It must be allowed to stand for 24 hours after installation before commissioning.
5. For dust collectors and silicon high-voltage rectifiers installed outdoors, rain and moisture-proof facilities must be installed. There are protective railings around the silicon high-voltage rectifier, and the sign "High Voltage Danger" is hung.
6. The power control box and rapper control box should be placed in a dry, ventilated, and easy-to-operate duty room.
维护保养 Maintenance of Rotary Umbrella High Efficiency Electric Dust Collector
1. A full-time system must be established for the operation of the equipment, which must be managed by a person, and a watch record file must be established.
2. For dust-laden gas with higher dew point and higher temperature, it should be heated up for a period of time so that the temperature in the electric field is higher than the dew point of the gas before it can be started. If condensation is found during operation, the temperature of the dusty gas can be used to increase the temperature and heat preservation measures. During operation, if the voltage is unstable and the flashover is frequent, the working voltage should be appropriately reduced and then put into normal operation. When shutting down, first clean up the dust, then adjust the output current and voltage of the control box to zero, and then turn off the power switch.
3. Regularly check the working condition of the electric field of the dust collector to ensure its integrity. Problems should be resolved in a timely manner.
4. Frequently check the working conditions of the power supply and the rapping device, pay attention to the operation of the voltmeter and ammeter, and their values must not exceed the rated maximum. Keep the equipment clean.
5. Regularly remove the dust on the inner wall of the electric field of the dust collector and the corona wire to ensure normal operation.
6. Replace the corona wire regularly, usually once every one to two years.
7. Always pay attention to the operation of the ash lock device to prevent air leakage.
8. Attach importance to the performance of the auxiliary machine of the whole dust removal system to make them match each other.
Rotary umbrella high-efficiency electrostatic precipitator parameters:
|Air volume||m3 / n||≤3500||≤7000||≤10000||≤14000|
|Electric field wind speed||m / S||≤2.5|
|Smoke population concentration||g / m3||≤8.0|
|Dust collector resistance||Pa||196|
|Dust removal efficiency||%||≥99.8%|
|Equipped with power||5mA / 100kV||10mA / 100kV||20mA / 100kV||20mA / 100kV|
|Equipped with cylinder shaker||DZ100 4100W -220V|
|Corona wire rapper||DZ100 4100 -220V|
Botou Junzheng Environmental Protection Equipment Co., Ltd. is a professional manufacturer of environmental protection dust removal equipment integrating design, development, manufacturing, installation, commissioning and after-sales service. The company is located in Botou, Hebei Province, which is known as the “Hometown of Yali”. City, the company is close to the Beijing-Shanghai Railway, the Beijing-Shanghai Expressway and the 104 National Highway in the east, and the 106 National Highway in the west is connected to the Shihuang Expressway.
The main products of Junzheng Environmental Protection are: bag dust collector, pulse dust collector, cyclone dust collector, stand-alone dust collector, filter cartridge dust collector, boiler dust collector, electrostatic dust collector, desulfurization and denitrification dust collector, woodwork dust collector, wet dust collector, Exhaust gas treatment equipment, industrial dust collectors, etc. Dust collector bag, dust collector frame, electromagnetic pulse valve, dust humidifier, star discharger, bucket elevator, plug valve butterfly valve, pulse controller, screw conveyor, electric dust removal accessories, etc. It is used for the recovery of particulate dust and fine dust in the waste gas of large, medium and small enterprises, such as chemical industry, power industry, metallurgy, asphalt mixer and other waste gas.
Junzheng Environmental Protection has more than one hundred types of dust collector equipment and its various accessories. Dust removal equipment is strictly controlled from design, manufacturing and inspection. The manufacturing standards are strictly implemented in accordance with national operating process regulations. Yanzhi Factory takes quality as the credibility and technology investment as the breakthrough point to produce more high-grade, high-quality, high-performance and durable bag-type dust collectors, which better serve customers, so it is widely received by customers across the country. Praise.
Over the years, we have received the love and support of customers and friends from all walks of life. Through the unremitting efforts of all employees, we have broken a path of market-oriented and quality-oriented survival, continuous improvement, continuous development and innovation, and established a firm quality The belief in winning has created brilliant performance with rapid growth year after year. Adhering to the business philosophy of “high requirements, high starting point, high standards”, Junzheng Environmental Protection develops the market with the best quality, captures the market with the most reasonable price, and wins credibility with the most thoughtful service. We are the most professional in the production of dust collector accessories.
All the staff of Junzheng Environmental Protection Co., Ltd. warmly welcome friends from all walks of life to visit and guide us. We are willing to work with you to create the better future with the best service and the most sincere heart!
Botou Junzheng Environmental Protection Equipment Co., Ltd.
Contact: Manager Chang
Company QQ: 505310586
Email: [email protected]
Address: Siying Industrial Development Zone, Botou City, Hebei Province